NVIDIA GeForce RTX 4060 Ti Founders Edition & Custom Model Review Ft. MSI, GALAX & PNY

MSI GeForce RTX 4060 Ti Gaming X Trio Unboxing & Closeup

The MSI GeForce RTX 4060 Ti Gaming X Trio graphics card comes inside a standard cardboard box. The front of the package has a large "GeForce RTX" brand logo along with the "MSI" logo in the top left corner and the "Gaming X Trio" series branding in the lower-left corner. A large picture of the graphics card itself is depicted on the front which gives a nice preview of the Gaming X Trio design.

The packaging has put a large emphasis on the RTX side of things as the first feature enlisted by AIBs will be NVIDIA Ada architecture, Ray Tracing & DLSS support. NVIDIA has bet the future of their gaming GPUs on Ray Tracing support as these are the first cards to offer support for the new feature.

The back of the box is very typical, highlighting the main features and specifications of the cards. The three key aspects of MSI's top-tier custom cards are its blazing performance which is achieved by a fully custom design, the new Tri-Frozr 3 cooling system, and a new Torx Fan 5.0 fan and Core Pipe design which will offer better cooling performance.

There's also a focus towards GeForce.com on each AIB card through which users can download the latest drivers and GeForce Experience application which are a must for gamers to access all feature sets of the new cards.

The sides of the box once again greet us with the large GeForce RTX branding. There's also the mention of 8 GB GDDR6 (RTX 4060 Ti) memory available on the card. Opening the box, you are greeted with a nice SUPRIM logo.

Outside of the box, the graphics card and the accessory package are held firmly by foam packaging. The graphics card comes with a few accessories and manuals which might not be of much use for hardcore enthusiasts but can be useful for the mainstream gaming audience. The only two useful accessories are the GPU mounting anti-sag bar and the 16-pin to 2x 8-pin power adapter.

The card is nicely wrapped within an anti-static cover which is useful to prevent any unwanted static discharges on various surfaces that might harm the graphics card. The most interesting accessory that I found in the package was a graphics card support bracket. This bracket connects the graphics card to the casing, offering better durability and preventing any sort of bending that may occur due to the heavy weight of the Gaming X Trio & SUPRIM X series graphics cards.

After the package is taken care of, I can finally start talking about the card itself. This thing is a beast and I can't wait to test it out to find what kind of performance improvement I get over current-gen cards.

MSI’s Tri Frozr heat sinks are some of the biggest heatsink cooling solutions that I have ever tested. I first tested the Gaming X Trio when MSI released the 1080 Ti variant back in 2017 and that was a very aggressive design in its own right.

Since then, I have tested the RTX 2080 Ti, RTX 3090, and RTX 3090 Ti in their Tri-Frozr iterations. With the RTX 40 series cards, MSI has further refined the Tri Frozr design. The card measures the same at 338 x 141 x 52 mm and weighs in at 1167 grams. The card features a standard 2-slot height which is expected of today's high-end cards.

The cooling shroud extends all the way to the back of the PCB and it requires a casing with good interior space for proper installation. The back of the card features a solid backplate that looks stunning. The backplate offers a lot more functionality than just looks which I will get back to in a bit.

In terms of design, we are looking at an updated version of the Tri Frozr heatsink known as Tri Frozr 3 which is now in its eighth variation. The first variation started off with the GTX 780 Ti Lightning, the second was the 980 Ti Lightning, then came the 1080 Ti Gaming X Trio, the 1080 Ti Lightning, then the RTX 20 & RTX SUPER Gaming X Trio graphics cards while the seventh generation was introduced on the RTX 30 series. Now we are in the eighth generation.

The new heatsink looks like a beefed-up version of the Gaming X Trio heatsink that we saw on the 3090 with the main changes being the shroud and heatsink design that features a neater shroud design on the front which features the claw-shaped RGB pattern on the front and a carbon-fiber touch across the sides of the cards.

Coming to the fans, the card actually features the latest fan designs based on the Torx 5.0 system. All three fans feature a ring-based design to allow for higher airflow to be channeled within the main heatsink. All fans deploy a double ball bearing design and can last a long time while operating silently. Each fan has three blades that form three sets and each fan has three sets of them that make up a total of 9 fan blades. Each blade is tilted at a 22 degrees angle to the main high-pressure airflow.

MSI also features its Zero Frozr technology on the Tri Frozr heatsink. This feature won’t spin the fans on the card unless they reach a certain threshold. If you notice closely, you can see that the card features beveled edges that are polished several times with a diamond-tipped cutter to achieve a mirror finish, and that can give a slight gold effect which looks great.

In the case of the Tri Frozr heatsink, that limit is set to 60C. If the card is operating under 60C, the fans won’t spin which means no extra noise would be generated.

I am back at talking about the full-coverage, full metal-based backplate that the card uses. The whole plate is made of solid metal with rounded edges that add to the durability of this card. The matte-black finish on the backplate gives a unique aesthetic. The graphics card also comes with a compact PCB design which means that the shroud, heatsink, and backplate are all extended beyond the PCB. The third fan blows air through the heatsink and blows it out from the cutouts that are situated at the very end of the backplate.

There are cutouts in screw placements to easily reach the points on the graphics card. We can also see the iconic MSI Dragon logo. MSI is also using heat pads beneath the backplate which offer more cooling to the electrical circuitry on the PCB. The most interesting thing to spot on the back aside from the backplate is the large retention metal bracket which adds more mounting pressure to effectively disperse heat from the GPU to the heatsink.

With the outside of the card done, I will now start taking a glance at what's beneath the hood of these monster graphics cards. The first thing to catch my eye is the humungous fin stack that's part of the beefy heatsink that the cards utilize.

The large fin stack runs all the way from the front and to the back of the PCB and is so thick that you can barely see through it. It also comes with the wave-curved 2.0 fin stack design which I want to shed some light on as it is a turn away from traditional fin design. The card also uses antegrade fins on the back that direct and optimize air pass-through on the back, allowing more warm air to pass out of the card like a nozzle.

The heatsink has been designed to be denser by using a wave-curved and filled-fin design. It allows more air to pass through the fins smoothly, without causing any turbulence that would result in unwanted noise. Airflow Control Technology guides the airflow directly onto the heat pipes, while simultaneously creating more surface area for the air to absorb more heat before leaving the heatsink. The heat pipes have also been arranged in a way that allows MSI to stack even more fin room.

Talking about the heatsink, the massive block is comprised of 7 copper squared-shaped heat pipes with a more concentrated design to transfer heat from the copper base to the heatsink more effectively. The base itself is a solid nickel-plated base plate, transferring heat to the heat pipes in a very effective manner. To top it all off,

MSI adds extra protection to its impressive PCB by including a rugged anti-bending plate. This also acts as a memory and MOSFET cooling plate while the PWM heatsink with micro fins keeps the VRM cool under stressful conditions. I/O on the graphics card sticks with the reference scheme which includes three Display Port 1.4a & a single HDMI 2.1 port.

The card ships with a single 8-pin connector so you don't have to worry about using a Gen5 power adapter.

You can find additional information about our hardware review process and ethics policy here.

Follow Wccftech on Google to get more of our news coverage in your feeds.