Update Galaxy Note 2 N7100 to leaked XXUEMK4 Android 4.3 Jelly Bean Firmware

Abdullah Saad
Posted 3 years ago

We have already seen one Android 4.3 Jelly Bean ROM for Galaxy Note II, which was leaked earlier on. The release had its share of bugs, since it was a leaked and not an official ROM.

Today, we have seen another leak of an Android 4.3 Jelly Bean ROM intended for the Galaxy Note 2 N7100. This new leaked firmware has a newer build date, has less bugs and more features.

Please do note, that all new versions of Android 4.3 will also install Samsung Knox and Samsung Wallet on your ‘phablet’. You can also expect to see several more releases of the same kind in the near future, as Samsung gets near to releasing the official version of Android 4.3 for Galaxy Note 2 N7100.

N7100XXUEMJ5 Android 4.3 Jelly Bean Firmware

Android 4.3 UCUEMJ2 Firmware Details:

Version: 4.3
Date: 16 Nov, 2013


Update Galaxy Note 2 N7100 to leaked XXUEMK4 Android 4.3 Jelly Bean Firmware

Update Galaxy Note 2 N7100 to Latest Android 4.3 Jelly Bean Official Firmware

  1. Download and Extract firmware upgrade zip file to get a file with .tar extension in the unzipped folder.
  2. You will then extract Odin zip file to get Odin3 v3.07.exe.
  3. Switch your phone off. And make sure that you wait 5-6 seconds to confirm complete the power down cycle.
  4. You will then put your Galaxy Note 2 N7100 phone in Download Mode by pressing and holding down the Volume Down button, alongside Home and the Power button, until the screen flashes the Samsung Logo. After a few seconds of that, the phone will enter download mode.
  5. Run Odin3 v3.07.exe with Administrator rights.
  6. Connect your Galaxy Note 2 N7100 with your PC. You will then see a notification appear in Odin in the bottom left saying “Added!!”. If for some reason, you do not see the said notification, try another USB port. If that too doesn’t work, then reinstall the USB driver. Once you successfully see the “Added!!” notification in Odin, you are good to go. Also, check for COM port being depicted by a number in ‘yellow’ to make sure that you have successfully added your device.
  7. Select the following files in Odin at their respective tabs from extracted firmware folder :
    • Click on AP, select AP_N7100XXUEMK4_2099172_REV04_user_low_ship.tar.md5.
    • Click on BL, select BL_N7100XXUEMK4_2099172_REV04_user_low_ship.tar.md5.
    • Click on CP, select CP_N7100DDEMJ9_REV08_CL1423182.tar.md5.
    • Click on CSC, select CSC_ODD_N7100ODDEMK1_2099172_REV04_user_low_ship.tar.md5.
  8. Hit the ‘START’ button to begin the flashing process.
    Once the flashing process is completed, the phone will automatically reboot and you will see a ‘Green’ PASS notification in the top-left-most box. You can unplug the device from the computer now.

If you have followed every point described in the guide, your Galaxy Note 2 N7100 should now be running the latest version of Android 4.3 Jelly Bean. If there are any issues, feel free to post in the comments section for our staff to take a look at it.

If for some reason the Galaxy Note 2 does not come out of a boot-loop, simply reset the device to factory settings via recovery.

Share on Facebook Share on Twitter Share on Reddit