Update Galaxy Note 10.1 N8010 to XXUCMA8 Android 4.1.2 Jelly Bean Official Firmware

Author Photo
Posted 4 years ago
13Shares

Samsung has been quite active this year, in order to bring the latest Android software to its entire product line up. They have now released for Galaxy Note 10.1 N8010; XXUCMA8 Android 4.1.2 Jelly Bean Official Firmware. While this update is available via KIES and it is recommended that you get it from there. If for some reason, you cannot access the official update or would like not to wait and get it on your tablet right now, here is a guide to update your Galaxy Note 10.1 N8010 to XXUCMA8 Android 4.1.2 Jelly Bean Official Firmware.

Also, read: Guide to Root XXUCMA8 Android 4.1.2 Jelly Bean Official Firmware on Galaxy Note 10.1 N8010

Disclaimer:This guide will use a tool; Odin to flash the official firmware on your Galaxy Note 10.1 N8010. During the process, you might lose all your existing installed apps and personal settings. It is therefore necessary for you to follow the guide carefully. Also, please, do mind that this tutorial is only for Galaxy Note 10.1 N8010. Don’t try this guide in any other Android device.

Android 4.1.2 XXUCMA8 Firmware Details:

PDA: N8010XXUCMA8
CSC: N8010RBTCMA4
Version: 4.1.2
Date: 2013-02-05
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom

Advertisement

Download

  1. Android 4.1.2 N8010XXUCMA8 for Galaxy Note 10.1 N8010
  2. Odin 3.07
Microsoft is Using Real-World Testing to Stabilize Windows 10 Anniversary Update - Rollout to Take 3 Months

Update Galaxy Note 10.1 N8010 to XXUCMA8 Android 4.1.2 Jelly Bean Official Firmware

  1. Extract the firmware zip file that you have downloaded using the link above, you will then get a .tar file alongside other files.
  2. Extract Odin zip file to get Odin3 v3.07.exe.
  3. Power off your tablet. Wait 5-6 seconds to confirm complete switch off.
  4. Put the Galaxy Note 10.1 N8010 in Download Mode by pressing and holding Volume Down and Power button until Samsung Galaxy logo appears in tablet screen. Wait for a few seconds and you will be in download mode.
  5. Run Odin3 v3.07.exe (see Step 2) as an Administrator.
  6. Connect your Galaxy Note 10.1 N8010 with your PC using USB cable. A message will appear under Odin’s message box in the bottom left saying “Added!!”. Once you successfully see the “Added!!” message in Odin, you are good to go. Also, check for COM port with a number in Yellow to make sure that you have successfully added your device.
  7. Select the following files in Odin at their respective tabs from extracted XXUCMA8 firmware folder :
    • Click the ‘PDA’ Button, and select the .tar file here with *code* appearing in file-name.
    • Click the ‘Phone’ Button, and select file with *modem* in its name (Ignore, if this file does not file exist).
    • Click the ‘CSC’ Button, and select file with *csc* in its name (Ignore, if this file does not file exist).
    • Click the ‘PIT’ Button, and select the .pit file. Use only if you got it while extracting in step 1 above, otherwise ignore it.
    • In Odin window, make sure Auto Reboot and F. Reset Time checkboxes are selected. Please make sure that Re-Partition checkbox is selected, only if you are using a .pit file.
  8. Hit the ‘START’ button to begin the flashing process.
    Once the flashing process is completed, the tablet will reboot automatically and you will see a PASS message in the top-left-most box. You can now unplug the USB cable to disconnect your device from computer.
Apple's Free App Of The Week Is 'Dragon Hills' - Direct App Store Link

If you have followed every point described in the guide, your Galaxy Note 10.1 N8010 should now be running Android 4.1.2 Jelly Bean build N8010XXUCMA8. If there are any issues, feel free to post in the comments section for our staff to take a look at it.