Update Galaxy Camera GC110 to XXAMC4 Android 4.1.2 Jelly Bean Official Firmware

Abdullah Saad
Posted 4 years ago

Samsung has released a much anticipated galaxy camera software update; XXAMC4 Android 4.1.2 Jelly Bean Official Firmware. While the update is originally meant for Switzerland, Poland and Russia, it can be installed by users in other regions of the world as well. While this update is available via KIES and it is recommended that you get it from there. If for some reason, you cannot access the official update or would like not to wait and get it on your camera right now, here is a guide to update your Galaxy Camera GC110 to XXBL7 Official Firmware.

Disclaimer:This guide will be using ‘Odin’ as a tool to flash the official firmware on your Galaxy Camera GC110. During the process, you might lose all your existing installed apps and personal settings. It is therefore necessary for you to follow the guide carefully. Also, please, do mind that this tutorial is only for Galaxy Camera GC110. Don’t try this guide in any other Android device.

Android 4.1.2 XXAMC4 Firmware Details:

Version: 4.1.2
Date: April, 2013
Regions:  Poland, Switzerland, Russia



  1. Android 4.1.2 Jelly Bean GC110XXAMC4 for Samsung Galaxy Camera GC110
  2. Odin 3.07

Update Galaxy Camera GC110 to XXAMC4 Android 4.1.2 Jelly Bean Official Firmware

  1. Download and Extract GC110XXAMC4_GC110OXXAMC3_XEO.zip to get a file with .tar extension in the unzipped folder.
  2. You will then extract Odin zip file to get Odin3 v3.07.exe.
  3. Switch your camera off. And make sure that you wait 5-6 seconds to complete the power down cycle.
  4. You will then put your Samsung Galaxy Camera 2 GC110 camera in Download Mode by pressing and holding down the Volume Down button and the Camera button alongside the Power button, until a warning screen comes up. Press Volume up button then to enter Download mode.
  5. Run Odin3 v3.07.exe with Administrator rights.
  6. Connect your Galaxy Camera 2 GC110 with your PC. You will then see a notification appear in Odin in the bottom left saying “Added!!”. If for some reason, you do not see the said notification, try another USB port. If that too doesn’t work, then reinstall the USB driver. Once you successfully see the “Added!!” notification in Odin, you are good to go. Also, check for COM port being depicted by a number in ‘yellow’ to make sure that you have successfully added your device.
  7. Select the following files in Odin at their respective tabs from extracted XXAMC4 firmware folder :
    • Click the ‘PDA’ Button, and select the .tar file extracted in Step 1.
    • Click the ‘camera’ Button, and select file with *modem* in its name (Ignore, if this file does not file exist).
    • Click the ‘CSC’ Button, and select file with *csc* in its name (Ignore, if this file does not file exist).
    • Click the ‘PIT’ Button, and select the .pit file. Use only if you got it while extracting in step 1 above, otherwise ignore it.
    • In Odin window, make sure Auto Reboot and F. Reset Time checkboxes are selected. Please make sure that Re-Partition checkbox is selected, only if you are using a .pit file.
  8. Hit the ‘START’ button to begin the flashing process.
    Once the flashing process is completed, the camera will automatically reboot and you will see a ‘Green’ PASS notification in the top-left-most box. You can unplug the device from the computer now.

If you have followed every point described in the guide, your Samsung Canada Galaxy Camera 2 GC110 should now be running Android 4.1.2 Jelly Bean build GC110XXAMC4 and you have successfully implemented the latest galaxy camera software update. If there are any issues, feel free to post in the comments section for our staff to take a look at it.

Share on Facebook Share on Twitter Share on Reddit