Root XXU1AOCV Android 5.0.2 Official Firmware on Galaxy S6 – How to

Rafia Shaikh
Posted Apr 27, 2015
17Shares
Share Tweet Submit

We have just shared with you the steps to update G920FXXU1AOCV Android 5.0.2 on Samsung Galaxy S6. This is the latest official firmware available for the smartphone coming with performance stability and some battery issue fixes. Once you have updated your Galaxy S6 to the latest update, here is how root G920FXXU1AOCV on Galaxy S6 G920F.

Prerequisites to root G920FXXU1AOCV on Galaxy S6:

Please check these prerequisites before going forward to the root steps.

  • Download and install USB drivers for Samsung Galaxy S6 in your computer.
  • Make sure to take backup of any important files on your smartphone.
  • Enable USB debugging option by pressing Menu > Settings > Applications. Navigate and tap on Developer Options to ensure that USB Debugging is enabled.
  • Ensure that your Samsung Galaxy S6 carries more than 70% of charge.

Check and confirm your phone’s model number: Go to Settings on your phone > scroll down to About device or About phone and tap on it > note the Model number. This tutorial is ONLY for SM-G920F variant.

How to root G920FXXU1AOCV with CF-Auto-Root tool:

Required files: download Odin3 v3.09 for installation from here; also download Chainfire root tool for Samsung Galaxy S6 from this link and extract the zip

Here are the steps to root G920FXXU1AOCV on Galaxy S6 G920F 5.0.2 Lollipop.

  • Unzip Odin on your computer and install it.
  • Unzip Chainfire zip file and retrieve the contents on your computer.
  • Switch your phone off and enter into download mode: press and hold Volume Down + Home buttons simultaneously and then press the Power key till you see the construction Android robot sign. Press Power key again to confirm. OR, check how to enter Galaxy S6 download mode.
  • Open ODIN on your computer and connect your Samsung Galaxy S6 SM-G920F with your PC while it’s in Download mode. When connected successfully, you will get a message in Odin saying Added!!(In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).
  • In ODIN, click on the PDA button and select the CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 file downloaded earlier.
  • Ensuring that Auto Reboot and F. Reset Time are selected, click on Start to initiate the root process.
  • When the root process is successfully completed, you will get a PASS message and ID:COM will turn green.
  • Once your device automatically reboots in to Recovery mode and you see the home screen, you can disconnect your Samsung Galaxy S6.

Note: In case your device gets stuck at boot screen after installation and does not boot into recovery mode, you will have to do the entire procedure once again.

– Fix Samsung Galaxy S6 and S6 Edge Battery Drain Issues

Share Tweet Submit